192.168.254.254

192.168.254.254 IP Address

If you want to access the admin page, you need to open browser and type 192.168.254.254 in the address bar.

Or just simple click one of those Buttons below.


This should be your local IP Address and Router Admin. It works if you are in the same network as the router.

Note: If the button above does not work, it means that the default gateway used is not the IP address, and you can only open the router login page if you are logged into the same network.


some people type it wrong, like 192.168.254254

Default Logins for 192.168.254.254

IP Address
Username
Password
IP Address
Username
Password

How to Log in to 192.168.254.254

We can access the administrative panel with the IP address. Here, we’ll give you a brief about how to find the correct IP address, confirm the connectivity, and also configure the admin panel.

  1. Find Router’s IP Address

    The IP address for router’s brands, such as Siemens, Actiontec, and Sagemcom is 192.168.254.254. You can find it on the side of the packaging box. If you can’t find it, you can find the private address assigned to your device with these steps:
    – Use the Command Prompt from the Start Menu and use IPConfig
    – Go to the ‘Local Area Connection’
    – You’ll see the IP Address as the Default Gateway

  2. Confirm the Connectivity

    You can use the 192.168.254.254 IP address to access the admin console with these steps:
    – Make sure the device has the same internet network with the router IP Address
    – Choose your favorite Browser
    – You can easily copy this -> http://192.168.254.254 and paste on the address bar
    – It leads you to the Login Page
    – Use the default username and password given on the ‘Default Logins for 192.168.254.254’ section

  3. Configure

    When the setting page on the admin console is open, you can change the settings as you wish. You can change the password, username, and even the DNS to other private address. Make notes to all changes so you won’t forget in the future

Troubleshooting Methods for 192.168.254.254 IP Address

Make sure the router has been connected to your device.

Type the IP Address correctly, make sure you don’t mistype it. Add http:// or https:// in front of the 192.168.254.254

If the IP Address leads to error landing page, use IP Config to ensure you’ve typing the correct one.

You can try hard reset by pressing the reset button if your efforts failed. Reset the router will revert to its default settings.

Sometimes you can’t access the landing page even though you use the correct IP Address. You can try on different browser and make sure clear the Cookies and Cache on the current browser.

Contact the Router’s Customer Service if you couldn’t find any solutions for the issues.

Leave a Comment