Default IP Address for Aukey Router
Default Logins for Aukey Router
Aukey Router Login Instruction
Aukey device model WD-N2 uses 10.10.10.254 as the default IP Address and ‘admin’ as the password. We believe that you can leave the username field empty to login with these credentials. Follow this instruction to login to Aukey router:
- Wired Network
We believe that Wired Network is perfect as it won’t log out without giving your permission to save all changes. Plus, you just need to setup the cable and plug it to the LAN Port and device. Turn on the gateway and it is ready to go.
- Web Browser
As we are about to access the login page through the web interface, we need a browser and IP address to locate the CPanel page. Simply click the Admin or Login button in the first section of this page to get direct link.
- Enter Credentials
It is 100% sure that the default IP address is 10.10.10.254. But if it is not working, you can use the information from the labels to find out the right credentials.
Aukey Router FAQs & Help
When you forgot the login password, you can always try to hard-reset your router. And you can re-login with the default IP Address and username and password to re-login. Make sure this time you use simple password to remember.
Use the reset button and press and hold it for at least 11 seconds. And then wait for 1 minute before you start to turn it on again. There you go, it is already reverted to factory setting.
This one happens as you lost the internet connection. Check your device and make sure it’s connected with WiFi.