Aztech Router Login – IP Address, Username, Password

Default IP Address for Aztech Router

192.168.1.1

192.168.2.1

10.0.0.1

Default Logins for Aztech Router

IP Address192.168.1.1
Usernameadmin
Passwordadmin

Aztech Router Login Details

Aztech Router has at least 7 models that use different IP Addresses and credentials. Make sure you know which type of device you use to select correct IP address and credentials. Here’s to setup the device:

  1. Setup Ethernet Cable

    We must set and connect the Ethernet Cable to the LAN Port and device, then wait until the device is on. The light indicators will turn green when the device is ready to use.

  2. Launch a Web Browser

    Open your go-to browser and in the address bar, write the default IP Address of the router. You can click the ‘Login’ or ‘Admin’ button in the first section of this page to simplify the process.

  3. Enter Credentials

    Use the credentials to access the CPanel of the router. Make sure it is the correct one or else you can’t access the administrator page. Most of Aztech models use ‘admin’ for both user and password.

Aztech Router FAQs

Why is Login Page not Loading?

If it takes a really long time to load the page, the internet connection might causes the issue. But on some cases, wrong IP router can prevent the login page to load.

Forgot Login Password?

When it happens, you can revert the router to factory setting. Then use the default credentials to re-login and access the CPanel.

Why Can’t I Login to Router?

When you use incorrect password, you won’t be able to access the login page. So just make sure you use the right one to avoid this issue.

Leave a Comment