192.168.1.254

192.168.1.254 IP Address

If you want to access the admin page, you need to open browser and type 192.168.1.254 in the address bar. Or just simple click one of those Buttons on the right.

This should be your local IP Address and Router Admin. It works if you are in the same network as the router.

Default Logins for 192.168.1.254

IP Address:
Username:
Password:

IP Address:
Username:
Password:

IP Address:
Username:
Password:

IP Address:
Username:
Password:

How to Login 192.168.1.254 IP Address

In order to maximize the potential of the router, you need to have access to its console. It lets you to change the settings, username, and the password as well. You can access the administrative console by these simple steps:

  1. Open the Browser

    You can open your favorite browser and then add 192.168.1.254 in the address bar. DO NOT use the www. extension in front of the IP Address. Instead, you can use http://192.168.1.254.

  2. Insert Username and Password

    Most of the time, you can use the ‘username’ for the username field and ‘password’ for the password field. Others use the ‘admin’ for both username and password fields. You can refer to the user guide for smooth login. Once it is done, you can have full access to administrative console.

  3. Custom Username and Password

    Having access to the administrative console lets you change the username and password. It’s good for security purpose. Other than that, you can do pretty much everything and configure to advance settings.

Troubleshooting Methods

Some people encounter issue during the process and error messages show up. It happens even when you’re correct input the username and password. It seems that the router might not have internet access. When it happens, you can try these troubleshooting methods below.

Ensure the Ethernet cable plug in properly to the router. Loose cable will interrupt the connection.

Unplug the router and modem for a few moments. Then replug it properly. Wait a minute before checking the connection. This reboot method works most of the time.

You can try to connect after you disable the firewall. The firewall usually blocks a new connection as a part of the safety checking.

If the last method failed, you can try the Factory Reset on the Router. You just need to push the reset button. Done!

Getting Connected

You can check the internet connection by trying to connect the ethernet cable to your PC.

The router’s box should contain the manual or guide that shows the username and password for the default IP address.

Connect the router to the power source. Wait a minute until all the LED Lights turn into green. If the red one appears, it indicates there’s issue on it.

At this stage, you can connect the ethernet/ modem/ ISP cable to the router.

Leave a Comment